LMS85-HW
logo landa6LMS85 HWDSC03336coax-on-trailer - Copy2

LMS85 HW PORTABLE ANTENNA TOWER

$41,900.00

Product Description

LANDA PORTABLE CELL TOWER

  • Diamond plate ¼” Deck 18′ long x 8’ 2” wide, water-fall sides adding 400% to strength
  • Trailer weight before base and tower, 4920#
  • Electrical components bonded to frame for system grounding
  • Integrated tower base tilt system constructed with 4”x4”x1/4” structural tubing for extra strength
  • 11’x 8’ open deck space in front of tower assembly mount.
  • All steel construction 10” wide beam construction, no aluminum.
  • 6 Hole coupler channel adjustable and removable 2 5/16″ ball hitch, optional Mil spec Pintle
  • 7 pin RV-Type connector
  • 10,000lb side pull spring loaded tongue jack
  • Emergency trailer breakaway device
  • 2ea two hole 1/0 ground lugs
  • 2ea heavy duty safety chains
  • 4ea telescopic crane style outriggers with 4ea adjustable 5000lb jacks
  • Optional easy slide outrigger package with roller bearings
  • Deployed outriggers footprint 20′ X 40’ when fully deployed
  • 4ea bubble type trailer level guides
  • Galvanized and powder coated wheels,
  • 2ea 7,000lb axles each electric brakes, flipper-spring, equalizer-suspension 14,000 GVWR
  • 5ea Power coat over galvanized wheels LT235 /80R 16 radial tires W/full size spare under deck
  • All weather padlocks and hide-a-key
  • DOT and Transport Canada Led lighting package and reflective tape
  • 36” Steel locking tool box
  • Flashing emergency lights

 

TELESCOPIC TOWER, PATENTED

  • 85’ model (tower assembly wt. 3500lbs)
  • 120 volt 60Hz power operation / Optional 240 50hz
  • 36” super heavy duty base section
  • 5ea-21’ multiple sections
  • 3 sector antenna mount / custom mount designs available
  • Galvanized finish for all weather operation
  • Weatherproof (locking) control panel, Limit switches for tilt and extension operation
  • 1 hp Electric motor w/60:1 worm drive allowing tower to be safely deployed at any height.
  • Backup powerless key operation allowing tower to be raised or lowered with a Cordless Drill
  • Theft proof Cable storage reel, optional electric, multiple reels, split reels and handles
  • 5ea Cable guide rings
  • Weatherproof (locking) control panel
  • 9000lb pull down winch enabling 1 minute from horizontal to vertical with load
  • 900:1 gearing allowing raising and locking at any height level up to 85′
  • Adjustable full erection adjustments from 12 to 30 minutes
  • 9 position guy kit
  • Heavy duty upper and lower limit switches
  • 110vac 60Hz / Optional 240vac 50Hz
  • High strength 7-19 galvanized aircraft quality lifting cables
  • PATENTED Derlin Mast Guide Blocks
  • 850lb tilt payload tested, 40 square foot of sail, 90 mph wind, no ice
  • Redundant tower retraction cables
  • Towing dimensions 30’.5″ LONG, 8′.2″ WIDE, 10′.4″ HIGH, flat rack shippable, tow on.
  • Latent weight of complete unit is 10,400 lbs
  • Maximum angle of terrain in degrees for safe trailer deployment up to 7 degrees side to side, 3.5 degrees front to back without additional blocking.
  • Guy radius and additional anchor design dependent on loading and winds to be determined by engineering.
  • High wind all terrain off-road applications.
  • Can be pulled with standard 3/4 ton pickup truck for off road 4×4 recommended.
  • Equipped with lifting hooks in all four corners for helicopter lift for remote.
  • Built for rough / inaccessible terrain applications.
  • Can be pulled in with bulldozers and deployed.
  • Units have been tested and utilized by Missile Defense, BAE, FireWatch, Anchor Electric, Calif. Pacific Gas and Electric, T-Mobile, Verizon, Sprint, Alcatel-Lucent Sanders, White Cloud Communications, Parsons, Cellxion, and specifically FEMA in 160mph wind and ocean salt conditions. A few of the thousands of satisfied clients with never a failure.
  • Military designed to meet most military environmental and transport applications.
  • Engineered and designed to meet the rigor demands
  • Comprehensive Operations Manual plus Warranty24 hour support
  • Overseas Shipments units are completely sprayed coated and shrink wrapped $1200.00

 LMS OPTIONS

  • fixed lockouts
  • double cable reel, galvanized with inner steel lining and flip handle for multiple cables
  • DOUBLE WALL CONTAINMENT FUEL TANKS 50 GALLON / 100 GALLON.
  • OUTRIGGER JACK SHOE OPTION FOR SOFT SOIL PLACEMENT.
  • LIGHTNING PROTECTION PACKAGES FOR ALL Applications / launch pad technology experienced
  • AIR BRAKES ON ALL MODEL TRAILERS
  • AIR OVER HYDRAULIC BRAKES
  • 8,000 LB AXLES, W/ELECTRIC BRAKE & SOLID WHEEL, 16PLY TIRES w/grease fittings upgrading the studs to 5/8″ and solid steel wheel, 16 ply  Incorporating a longer equalizer to moving the front axle forward one foot to cut down on the tongue weight.  Moving the jack up 4″ to make it set higher on the frame and dropping the coupler 4-1/2″. Changing the distance between jack and ground 8″.
  • MILL SPEC ANTI CORROSION FINISH: FULL TRAILER PRIMED WITH INORGANIC ZINC CONFORMING TO MDDOD-P-23236A.   COATED WITH AN EPOXY POLYAMIDE INTERMEDIATE COAT CONFORMING TO MS-P-2441 FORMULA 150 AND URETHANE TOP COAT CONFORMING TO RAIL SYSTEM.
  • 8′ MICROWAVE DISH “LMS STAR BRACKET” ATTACHMENT FOR FRACTIONAL MOVEMENT AND STABILITY.
  • TORQUE ARMS FOR LARGE 6’/10′ MICROWAVE DISH PLACEMENT
  • SLIDE OUTS FOR CABINET SERVICE. CUSTOM SIZE PER REQUEST.
  • TRAILER DECK LENGTHENED TO ACCOMMODATE TRANSPORTABLE MICROWAVE DISHES.
  • SOLAR W/REMOTE CONTROL SYSTEMS
  • NEEDLE BEARING OUTRIGGERS ALLOW TWO FINGER OPERATION WITH EASE.
  • PLATFORM SAFETY RAIL SYSTEMS.
  • ELECTRIC TONGUE JACKS
  • 240 VOLT, 50HZ POWER CONFIGURATION FOR EUROPEAN, ASIA AND AFRICA FUEL AND POWER REQUIREMENTS.
  • BOOTS TO COVER MOTORS AND WINCH KIT
  • LMS LIGHTNING ROD SYSTEM FOR TOWER TOP MOUNT.
  • GROUND ROD STORAGE COMPARTMENT, TO HOLD MULTIPLE RODS
  • PATENTED CLAD KITS FOR LATTICE TOWERS. FOR ROUGH TERRAIN TRANSPORT AND USE
  • PATENT PENDING LMS PORTABLE ANTENNA TOWER STOPS. FOR REDUNDANT SECURITY WITH EXTREME HEAVY LOADS, OR ON A PERMANENT INSTALL.
  • LMS 5 ARM STAND OFF BRACKETS FOR PNEUMATIC TOWERS, 6 ARM BRACKETS AVAILABLE AS WELL.
  • LMS  STAND OFF BRACKETS
  • SINGLE POLE ANTENNA TOP MOUNT FOR OUR LATTICE TOWERS
  • ANTI TOWER CLIMB SKIRTS WRAP TOWER TO PREVENT UNAUTHORIZED CLIMBING. 6′ AND 8′ TALL
  • PORTABLE Generator’s, all sizes and also fuel tanks, transfer pumps integrated.
  • cabinet’s all types, and gooseneck trailer options